Bando P72-14M-170 HT QD Timing Belt Pulley (J) 15mm Wide

Bando P72-14M-170 HT QD Timing Belt Pulley (J) 15mm WideBando P72 14M 170 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

34K45-139-B HP

Packard - PHL505

20 A Rated torque 14

84 Technical Data

2x(Code H) No load current 3

6 POLES 6 NUMBER SPEEDS 1 RPM 1185 HERTZ 60 VOLTS PRIMARY 200 VOLTS 200 FRME 324 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE OPPOSITE END BEARING 6211-2Z-J/C3 SHAFT END BEARING 6311-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

Load 56° C Start Configuration DOL Break-Down Torque 190 LB-FT Pull-Up Torque 100 LB-FT Locked-Rotor Torque 110 LB-FT Starting Current 164 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

75 HP) Number of Poles 2 Frequency 50 Hz Rated speed 2805 rpm Slip 6

81 % Rated voltage 460 V Rated current 12

05 IN Power Factor 60 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

15 IN Power Factor 75 Product Family WD All SS Encapsulated Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

739 Line Amps 0