Fasco D728 Fan and Blower Motor, 3/4-1/2-1/3 HP, 1 Ph, 60 Hz, 115 V, 1075 RPM, 3 Speed, 48 Frame, OAO RW_E - SOLID STATE OVERLOAD RELAYS

Fasco D728 Fan and Blower Motor, 3/4-1/2-1/3 HP, 1 Ph, 60 Hz, 115 V, 1075 RPM, 3 Speed, 48 Frame, OAO RW_E - SOLID STATE OVERLOAD RELAYSDirect Drive Fan and Blower Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 10 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Ball Bearing 1 2" Diameter Shaft with Double Flat 26" Leads Extended Studs Lead End, Resilient Ring Mounting, Belly Band Mount (Belly Band Not Included) Additional Information Thermal ProtectionThermally Protected Speed1075 rpm

7 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 1800 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 18 AWG Motor Type 0526M Mounting Arrangement F1 Number of Poles 6 Overall Length 12

Rise @ Rated Load 49° C Start Configuration DOL Break-Down Torque 35

9 POLES 2 NUMBER SPEEDS 1 RPM 3565 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 365 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6313-J/C3 SHAFT END BEARING 6313-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

3 VOLTS 230 RPM 1800 HZ 60 BEMF (V) 124 LD (MH) 48

Load 71° C Start Configuration DOL Break-Down Torque 152 LB-FT Pull-Up Torque 69

625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1075 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location SB Winding Thermal 2 None Drawings

75 KG20 IC411 APRV-CSA Y Performance

3 POLES 4 NUMBER SPEEDS 1 RPM 1785 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 449 SHAFT CODE TPH MOUNTING VERT ASSEMBLY POSITION NA MOTOR TYPE RUSI OPPOSITE END BEARING 7226 BCBM SHAFT END BEARING 6218-J/C3 AMBIENT 40 SERVICE FACTOR 1

Load 61° C Start Configuration DOL Break-Down Torque 224 LB-FT Pull-Up Torque 131 LB-FT Locked-Rotor Torque 146 LB-FT Starting Current 193 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

BP5027A01SP BRUSH ASSY

841 Line Amps 1

15 NEMA-NOM-EFF 91